Construction of Clean Room with Modular Wall Panel
Our dedicated technical team is very strong and competent with latest technology & standards. We follow the following standards/guidelines to construct our clean room:
ISO 14644-1:2015 | ||
FED 209E | ||
cGMP |
Cleanroom
| Powder Coated GI (PCGI) | ||||
| Pre-Painted GI (PPGI) | ||||
| Stainless Steel (SS-304) |
Features
| Panels are resistant to abrasion, chemicals and reagents | ||||||
| Panels are non–combustible, non–shredding, water and fire retardant | ||||||
| Panels have good impact resistance | ||||||
| Panel surface emits no particles | ||||||
| Panels have an appropriate balance of hardness and flexibility |
| Epoxy Resin Flooring | ||||
| Vinyl Seamless Flooring |
Features
| Excellent chemical resistance | ||||||
| Impermeability to oils and aggressive agents | ||||||
| Resistance to wear caused by people, trolleys and moving vehicles | ||||||
| Resistance to wear caused by frequent washing |
| Antibacterial: We have special antibacterial flooring and the edges of the room are sealed and airtight with proper corner coving |
| Antistatic: Risk of static charge build-up in the floor can damage the equipment or even cause an ignition. Choosing an antistatic dissipative floor (ESD) will protect against such problems | ||||||
| Releasing no particle in the surroundings: Epoxy and polyurethane resins are inert and low in Volatile Organic Compounds (VOCs), releasing no particles into the surrounding environment |
| Hinged Metallic Door (Single Leaf/Double Leaf) |
Construction
| The door leaf is constructed from 0.8mm/1.0mm/1.2mm/1.6mm thick zinc-coated galvanized steel sheet or SS-304. Zinc coating is 80-120 g/m2. Lock formed profile with internal stiffeners, 4.0 mm thick hinge reinforcing, hardware mounting plates, and lock protection. Doorframe from 1.2mm/1.6mm/2.0mm thick galvanized steel with mitered and welded corners, frame straps, Hinge reinforcing plates, fixing plates, and hardware mounting plates |
Insulation
| The door leaf is filled with either mineral wool, honeycomb paper/aluminum core, or polyurethane foam |
Finish
| Pure/Epoxy Polyester Powder coating on the galvanized steel door |
Glazing
| 5.0 mm thick glass on both side indoor leaf / one glass in the middle |
Fire Resistant
Up to 2 hours
|
| Pass Box (Static/Dynamic) | ||||||
| Laminar Airflow Unit | ||||||
| Air Shower | ||||||
Air-curtain
|
Our pharmaceutical cleanrooms are designed following a unique concept that is suitable for both certified and non-certified pharmaceutical areas. For pharmaceutical cleanroom setup, we offer a complete project management service including construction, design, support, and installation.
At Parsan, we provide a hard wall clean room system that combines both flexible solution, durability, and flush surface.
- Cleanroom construction
- Cleanroom installation
- Clean rooms are validated and installed by applying all major pharmaceutical companies
- Our engineering specialists guide you throughout the project to ensure success
- We hold more than 20 years of experience in the pharmaceutical field
We have a team of dedicated engineers who are experienced as well as competent with the latest technology and standard. At Parsan, our engineers follow proper guidelines for cleanroom setup. Now, let’s check out the features of our panels
- Panels are resistant to chemicals, abrasion, and reagents
- Panels are non-shredding, fire-resistant and non-combustible
- Panel surfaces have excellent impact resistance
- Panels have the right balance of flexibility and hardness
We make a cleanroom setup based on the number of particles in a given cubic space of air. We are committed to our customers and try to fulfill their requirements in all possible ways. From cleanroom setup to cleanroom validation, we provide all types of services at affordable prices.